Allied Remote Power Button Guide

Allied Remote Power Button Guide

Welcome to your Allied Remote Power Button (REPB) informational guide. This guide provides step-by-step instructions on how to operate and install your REPB for optimal performance.

Powering Your Battery ON/OFF

To ensure proper operation of your battery using either the remote power button or the mounted power button, follow these steps:

1. Powering ON:

   • Press and hold the button until the light turns on (approximately 3 seconds).

2. Powering OFF:

   • Press and hold the button until the light turns off (approximately 3 seconds).

Remote Power Button (REPB) Overview

• The Remote Power Button is optional and designed for convenient access.
• Installation Location: Underneath the front seat.
• Installation Requirements:
  • You may need to drill a hole using a 5/8” drill bit.
  • Connect the REPB to the battery using the designated REPB port.

Key Features:

• Enables easy power control of the battery without lifting the seat.

Compatibility Information

• The REPB is compatible only with the 48V 105AH REPB version.
• Important Note:
  • The battery must have an REPB port for installation.
  • Cannot be retrofitted to versions without the REPB port.

For further assistance or questions regarding installation and compatibility, please refer to your product manual or contact customer support.